About Us - Godrej Lawkim

Mechanical Parameter

MECHANICAL CALIBRATION (DIMENSIONAL)
S.N.	DESCRIPTION	RANGES
1	Bevel Protractor /Degree protractor/ Clinometers	0-360°
2	Combination Set	0-180°
3	Sine Bar/ Sine Table	Up to 300 mm
4	Comparator Stand	0-600 mm
5	Coating Thickness Gauges	0-1000 µm
6	Caliper Checker	0-1000 mm
7	Dial Calibration Tester	0-25 mm
8	Dial Thickness Gauge/pistol calliper	0-50 mm
9	Dial Caliper (Inside/Outside)	0-1000 mm
10	Dial Indicator (Lever/Plunger)	0-100mm
11	Dial Bore Gauge	0-500mm
12	Electronic comparator with Linear Probe	0-25mm
13	Foils	0-1000 µm
14	Feeler Gauge	0-5 mm
15	Inside Micrometer ( 2 point)	0-5000 mm
16	Depth Micrometer	0–300mm
17	Measuring Tape / Pie Tape	All Range
18	Pin Gauge/ Measuring Wires	All Types
19	External Micrometer	0-1000 mm
20	Micrometer Head	0-50 mm
21	Master Rod	Up to 1000 mm
22	Plain Plug & Ring Gauge (Go & Nogo)	0-600 mm
23	Cylinder Setting Master	Up to 200 mm
24	Profile Projector	0-360 °/0.001mm
25	Passa meter/Dial indicator	L.C= 0.5µm
26	Snap Gauge (Go & No Go)	0-300mm
27	Slip Gauge (Grade I/II/0/K)	Up to 100mm
28	Slip Gauge Calibrator	Up to 100 mm
29	Slip Gauge Accessories	Up to 300 mm
30	Optical Flat/ parallel	Up to 50 mm
31	Scale	Any Range
32	Straight Edge	Any Range
33	Spirit Level	0-200 mm
34	Flow Cup	Flow Measurement
35	Surface Plate/ Angle Plate	All ranges
36	Tri Square/ Engg. Square	Up to 600 mm
37	Thread Plug & Thread Ring Gauge	0-200 mm
38	Vernier Caliper	0-1000 mm
39	Vernier Depth Gauge	0-300 mm
40	Vernier Height Gauge	0-1000 mm
41	V Block	All Ranges
42	Engg Parallel	Up to 600 mm
43	Radius Gauge/ Thread Pitch Gauges	All Sizes

MECHANICAL CALIBRATION (TORQUE)
S.N.	DESCRIPTION	RANGES
1	Torque Wrenches	0-1000 Nm

MECHANICAL CALIBRATION (MASS)
S.N.	DESCRIPTION	RANGES
1	Weight Box	Up to 20 kg
2	Weighing Scale	Up to 300 kg

MECHANICAL CALIBRATION (VOLUME)
S.N.	DESCRIPTION	RANGES
1	Pipette, Burette, Flasks, Measuring Cylinders	All Ranges

MECHANICAL CALIBRATION (SOUND)
S.N.	DESCRIPTION	RANGES
1	Sound level meter	0 to 130 dB

MECHANICAL CALIBRATION (FORCE)
S.N.	DESCRIPTION	RANGES
1	Spring/ Tensile Testing M/c (All Types)	All Range
2	Universal Testing M/c	Up to 100 T
3	Hardness tester	All types
4	Push pull gauge	300kg

MECHANICAL CALIBRATION (DENSITY)
S.N.	DESCRIPTION	RANGES
1	Hydrometers	Density/ Specific Gravity

MECHANICAL CALIBRATION (SPEED)
S.N.	DESCRIPTION	RANGES
1	Tachometer	20000 RPM
2	Centrifuge	20000 RPM

MECHANICAL CALIBRATION (OTHERS)
S.N.	DESCRIPTION	RANGES
1	Anemometer	0.3 to 100 m/sec
2	Air Velocity Meter	Up to 100 m/s
3	Lux Meter	Up to 2kL
4	Rubber Hardness tester	0 to 100 Shore A & D
5	Vibration Meter	0-2000micron (p to p)
6	pH Meter	By Simulation Method
7	Conductivity Meter	By Simulation Method

MECHANICAL CALIBRATION (PRESSURE)
S.N.	DESCRIPTION	RANGES
1	Pressure Gauge /Test Gauge	0 to 700 bar
2	Vacuum Gauge	0 to 720 mmHg
3	Pressure Transducer/ Transmitter/Switch	0 to 700 bar
4	Low Pressure Gauges / BP Apparatus	0 to 2000 mm WC
5	Dead Wt Tester (Pressure & Vacuum)	-1 to 700 kg/cm²
6	Pressure Calibrator ( up to 0.025% accuracy)	Up to 700 kg/cm²
7	Differential Pressure Gauge	Up to 100 mm WC

PRESSURE CALIBRATION
S.N.	DESCRIPTION	RANGES
1	Pressure Gauge / Test Gauge	0 to 700 bar
2	Vacuum Gauge	0-720 mmHg
3	Pressure Transducer /Transmitter/Switch	0-700 Bar
4	Low Pressure Gauges	0-2000 mm WC
5	Dead Wt Tester (Pressure & Vacuum)	-1 to 700 kg/cm²
6	Pressure Calibrator (0.25% accuracy)	upto 700 kg/cm²
7	Differential Pressure Gauge	100 mm WC